Adjust Configuration
It may happen that, intentionally or unintentionally, an error occurs in one of the databases or the security module during operation. This results in a system failure and the register can no longer be used. If this happens, the setup assistant is restarted to fix the source of the error and make the primasello cash register ready for use again.
Among other things, the configuration can be adjusted by:
Deleting one of the two databases
Uploading an incorrect (or non-compatible) database
Uploading a runtime database backup
Removing the TSE during operation
Connecting a new TSE
Connecting a new RKSV signature card
Starting the configuration
The setup assistant starts automatically and displays an overview of configurable sections. The steps not affected by the error are marked with a green tick. All configuration sections with an empty red box have to be reconfigured, as they are affected by the error that has occurred.
Pressing the orange ‘Start’ button at the bottom starts the configuration and the setup assistant jumps to the first relevant section.
Projects
If an error has occurred in the project database or if it has been deleted, a new database has to be created, a new template selected or a backup of an existing database uploaded. The old project database is lost and cannot be restored. It is therefore advisable to create database backups regularly.
Press the desired setting to proceed to the next step of the configuration.
Load data from USB stick
How to load data from an external storage medium is described in the chapter Loading Data from a USB Stick.
Runtime data database
If an error has occurred in the runtime database or if it has been deleted, a new database has to be created or the backup of an existing database has to be uploaded. The old runtime database and all cash register data stored in it are lost and cannot be recovered. It is therefore advisable to create database backups regularly.
All receipts that were saved with a cash up are stored as a backup on the TSE and can still be accessed for review via the TSE export, but are no longer accessible in the primasello cash register.
Press the desired setting to proceed to the next step of the configuration.
Load data from USB stick
How to load data from an external storage medium is described in the chapter Loading Data from a USB Stick.
Register
If a runtime database backup is uploaded or the runtime database is deleted, the company data or cash register data have to be re-entered.
Press the orange ‘Next’ button at the bottom to proceed to the next step of the configuration. You can use the ‘Back’ button at any time to return to previous steps and correct your input.
Security module
If the TSE is removed from the USB connector while the primasello register is in operation, or if a connection error occurs between the register and the TSE, the TSE has to be reconnected. If a new TSE is connected, this also opens the setup assistant and the TSE has to be reinitialised. In addition, for security reasons, the TSE also has to be reconnected whenever any other error occurs.
If the existing TSE is reconnected, the AdminPIN and TimeAdminPIN have to be entered. If a new TSE is connected, the PINs are created.
Connect TSE
More information on connecting the TSE is provided in the chapter Security Module: TSE.
Complete configuration
Once all error sources have been eliminated, the setup assistant will take you to an overview page with a summary of all data. This should be checked again before completing the configuration. Use the ‘Back’ button to return to the desired step and correct any information. If the data is correct, press the orange ‘Create’ button at the bottom to complete the setup. The system saves the information and creates the new databases – this may take a few moments, depending on the amount of data. Once the setup is complete, a success message appears and the register can be put back into operation by pressing the orange ‘Start’ button at the bottom.